ABOUT US
         SERVICES
 PRODUCTS    
CONTACT
   
 
TYPES OF CLINKERS
  ORDINARY PORTLAND CLINKER (OPC) USAGE OF CEMENT TYPES TABLE
  SULFATE RESISTANT CLINKER (SRC)  
TYPES OF CEMENTS
  CEM I 42,5 AND 32,5  
  CEM II 42,5 AND 32,5  
  CEM III 42,5 AND 32,5  
  CEM IV 42,5 AND 32,5  
  CEM V 42,5 AND 32,5  
  SCR 32,5 SULFATE RESISTANT CEMENT  
 
  ORDINARY PORTLAND CLINKER (OPC)
 
ORDINARY PORTLAND CLINKER (OPC)
  SULFATE RESISTANT CLINKER (SRC)
 

SULFATE RESISTANT CLINKER (SRC)
  CEM I 42,5 AND 32,5
 

CEM I 42,5 AND 32,5
  CEM II 42,5 AND 32,5
 

CEM II 42,5 AND 32,5
  CEM III 42,5 AND 32,5
 



CEM III 42,5 AND 32,5
  CEM IV 42,5 AND 32,5
 


CEM IV 42,5 AND 32,5

  CEM V 42,5 AND 32,5
 


  SCR 32,5 SULFATE RESISTANT CEMENT
 

SCR 32,5 SULFATE RESISTANT CEMENT

  USAGE OF CEMENT TYPES TABLE
 

A)Cem I portland cement
TS EN 197 – 1 , CEM I 42,5 R


Portland cement is a hydraulic cement produced by grinding clinker with a small amount of setting regulator Common
Uses:
• For general purposes
• High strength concretes
• Prestressed concretes
• Early-strength reinforced concrete manufacturing
• Reinforced concrete high-rise buildings
• Sliding formwork / tunnel formwork system buildings
• Bridges, viaducts, subway crossings, crosspoints
• General precast reinforced concrete elements
• Road pavements
• Pavement concretes
• Water reservoirs
• Concrete and reinforced concrete pipes
• Railway ties
• Concrete briquettes


B) Portland Composed Cement
TS EN 197-1 , CEM II / A-M (P-L) 42,5


As defined in standards, CEM II A is a hydraulic binder product of grinded 6-20% mineral addition, 80-94% Portland cement clinker, and small amount of cement solidification material.
Common Uses:
• High Resistant Concrete
• Narrow Cross-section Concrete Production
• High Concrete Buildings
• Building Fortifying
• Groundwork Support Injection Production
• Silos and Water Depots
• Road Plating and Pistes
• Slide Mould / Tunnel Mould System Buildings
• Concrete Pipe Production
• Cobblestone Production
• Bims Block Wall Elements Production


C) Pozzolanic Cement
TS EN 197-1 CEM IV / B (P) 32,5 N


As defined in standards, CEM IV A is a hydraulic binder product of grinded 36-55% mineral addition, 45-64% Portland cement clinker, and small amount of cement solidification material.
Common Uses:
• Retaining Walls
• Building Repairs
• Park-Garden Accessory Elements
• Mass Building and Plaster Works



Min Res: 1024x768dpi, 16 bit. All Rights Reserved © 2004 - 2006. Hakan Yıldız Yöntek ® <Design&Application><www.webdebir.com>